home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d17
/
setlips.arc
/
SETLIPS.DOC
< prev
Wrap
Text File
|
1986-10-28
|
2KB
|
66 lines
LIPS-10 Laser Printer Set Up Program
1. General
For the full use of the laser printers, the user should know
the special sequence code for the printer setup. Some laser
printers require the codes started by ESC. On the other hand,
the LIPS-10 laser printer allows the easy setup to the user
by using the front panel. This program covers all setup
parameters which the user can select from the front panel,
however, this program is not the substitution for the front
panel setup, rather another easy setup method. For more
information about the LIPS-10 laser printer, contact to the
CIET (C.Itoh Electronics Terminals) at (714) 662-1421.
2. Details about program
1) Function Keys
This program is not complicated to use. Some function keys
are assigned for special purpose.
<ESC> : ends the program and returns to DOS
<F1> : displays the help screen
<F4> : resets to the default setup
<F5> : sets the printer
2) Display Adapter
The computer must have the CGA or the EGA. This program does
not run on the MDA. If the DIP switch is set to the MDA, the
program simply will display the message and returns to DOS.
3) Printer Port
For the parallel port, LPT1 to LPT3, are supported. For the
serial port, COM1 to COM2, are supported. When setting the
printer, if the printer is not connected, probably the
program will hang up.
3. Reference
1) Compiler : Turbo Pascal ver.3.0
Systems : IBM XT (w/640KB) and IBM AT (w/512KB)
CGA and EGA
LIPS-10 and OASYS laser printer
2) Books
Programmer's Guide to the IBM PC (by Peter Norton)
LIPS-10 Programmer's Manual
NOTE:
If other printers such as Epson and HP, other than LIPS-10 or
laser printers from OASYS, are connected, only LCL commands
will be printed.
Thank you for paying attention to my program.
Toshifumi Morisaki
CompuServe ID: 76525,2360
Source ID: BDJ234